A plate designed to fit a standard 19inch rack. This allows creation of charging walls using open 19 inch system or secure cabinet solutions

A module having 8 charging cradles and  power supplies

Also available are 'Elfa adapters' allowing the rack plates to be mounted onto standard Elfa or ladder racking

Many charging and communications variants are available for the TC53/8 series

• Holder only
• Charge only
• USB
• RS232

All versions are based on the Flexi Cradle design, which uses a metal back plate instead of the ABS version. Using metal allows the cradles to be wider to accommodate wider handhelds such as the TC53 and TC58.

Supplied complete not as bits and pieces:- cradle with cable plus connectors all in one box

Car Plug / Cig Plug -There are 2 versions 'Standard' and ‘Light’

• Light version
  • The 5 volt power supply in the car plug.
  • Lower cost competes with other suppliers.
  • 1 year warranty
• Standard versions
  • The power supply in the cradle. -
    • added voltage supression
    • higher current capability
    • better regulation.
  • The Car Plug can be removed and cradle can be hard wired into the vehicle.
  • 2 year warranty

Very small footprint compact style. utilises proven charge control circuit

• Over current protection
• Over voltage protection
• Short circuit protection

Available sizes:

• 2 slot
• 4 slot
• 6 slot
• 8 slot

The modular design offers many advantages not normally found on similar products in the market

Multiple formats - Use the same basic tried and tested parts
 

• Desk Cradles
  • Mini Desk Cradles - High density

• Vehicle Mount Cradles

• 19" Rack version - high capacity - small footprint

Cradles carry a 2 year warranty (apart from 'light' vehicle cradles which have 1 year)

Mounts are available for the vehicle cradles

• Low Cost Suction mounts for fixing to windscreens
• Clamp Mounts
• Forklift mounts

We like to hear from our customers and are here to help solve any challenges you have

Vehicle cradles purchased without another mount come complete with a tilt and swivel mount used to fix the cradle to dash and to allow the operator to adjust the display for optimum ease of use

If the vehicle is on a contract hire then sometimes the hire company does not like things screwed to the dash as it decrease re-sale value. In this case you can select a different mount such as the suction mount which does not damage the vehicle. We also have other mounting options available on request.
 

NOTE: Those ordered with a suction mount, exclude a tilt and swivel. If Tilt &Swivel  is needed please order separately

TC53 and 58 will be tested to work with ANDROID AUTO, the USB Vehicle Cradles communicate and charge through the USB cable

VERY LOW COST

• USB A
• USB C Most new vehicles are using USB C

Similar to standard mini desk range and uses same power control circuit. New specification :-

• 42% Lower cost
• ABS top housing
• Galvanised metal lower housing
• Smaller footprint
  • 110mm x 94mm
• Lighter weight
  • 280 g

Convert a hand held device into a hands free scanner. Holds the device inverted so scanner points down

• Stable
• Versatile
• Permanent Power
• Relaible

Two heights available

• Desk Mount Stand
• Floor Pedestal

NEW VERSION COMING SOON

Small parts of the cradles can be removed and exchanged, allowing them to be replaced or upgraded to another handheld type

Click here to see the advantages of the modular design